DL4300 Appliance
Exporting data to a VirtualBox virtual machine
263
Option
Description
The minimum amount is 1024
MB and the maximum allowed by
the application is 65536 MB. The
maximum amount of memory usage
is limited by the amount of RAM
available to the host machine.
11. To specify a user account for the virtual machine, select Specify the user account for the exported virtual
machine, and then enter the following information. This refers to a specific user account for which the virtual
machine will be registered in the event there are multiple user accounts on the virtual machine. When this
user account is logged on, only this user will see this Virtual Machine in VirtualBox manager. If an account
is not specified, then the Virtual Machine will be registered for all existing users on the Windows machine
with VirtualBox.
•
User name - Enter the user name for which the virtual machine is registered.
•
Password - Enter the password for this user account.
12. Click Next.
13. On the Volumes page, select the volumes to export, for example, C:\ and D:\, and then click Next.
14. On the Summary page, click Finish to complete the wizard and to start the export.
NOTE:
You can monitor the status and progress of the export by viewing the Virtual Standby or
Events tab.
Parent topic
Performing a continual (Virtual Standby) VirtualBox export
To perform this step, VirtualBox must be installed on the Core machine.
Complete the steps in this procedure to perform a continuous export to a VirtualBox virtual machine (VM) using
Rapid Recovery.
1. In the Rapid Recovery Core Console, do one of the following:
•
From the Core Console, in the button bar, click the Restore drop-down menu, and then select VM Export.
1. In the Virtual Machine Export Wizard, select Continuous (Virtual Standby).
2. Click Next.
•
From the Core Console, in the icon bar, click (Virtual Standby).
▪
On the Virtual Standby page, click Add to launch the Virtual Machine Export Wizard.
2. On the Machines page of the Virtual Machine Export Wizard, select the protected machine that you want to
export.
3. Click Next.
4. On the Recovery Points page, select the recovery point that you want to use for the export.
5. Click Next.
6. On the Destination page of the Export Wizard, in the Recover to a Virtual Machine drop-down menu, select
VirtualBox.
7. On the Virtual Machine Options page, select Remote Linux Machine.
8. Enter information about the virtual machine as described in the following table.
