Chapter 3: Setup
49
If you are uncertain about choosing parameters for your disk array, use the
Express or Automatic option to create your disk array.
To create a new disk array:
1.
Enter a name for the disk array in the field provided.
2.
Check the box to enable the following features.
•
Media Patrol – A routine maintenance procedure that checks the
magnetic media on each disk drive. Media Patrol is concerned with the
condition of the media itself, not the data recorded on the media.
•
PDM – Predictive Data Migration (PDM) scans the bad sector
remapping table of the disk drives assigned to a logical drive. When the
table fills to a specified percentage of its capacity, PDM triggers a
migration of data from the suspect drive (the disk drive with the bad
sectors) to a spare disk drive.
3.
Highlight physical drives you want in the disk array from the Available list and
press the
>>
button to move them to the Selected list.
You can also double-click them to move them.
4.
When you are done, click the
Next
button.
Summary of Contents for VTrack M-Class M200f
