Promise Technology VTrack M-Class M200f Product Manual Download Page 285

Page: 285 / 322

Chapter 8: Troubleshooting

277

Logical drive initialization
is aborted due to an
internal error.

System resources are low. Reduce system load or
restart the VTrak. See page 218.

Logical drive initialization
is queued

Initialization has been set manually or by schedule.

A new logical drive has
been created

Result of user action. Normal.

Logical drive has been
deleted

Result of user action. Normal.

Logical drive has been
placed online

The physical drives of the array are restored to online
status.

Logical drive has been
placed online. Possible
data loss

One or more physical drives in the array went offline.
See page 286.

Logical drive has been set
to critical.

One or more physical drives in the array went offline.
See page 286.

Logical drive axle has
been placed online

RAID 50. One of the axles (RAID 5 arrays) returned
on online status.

Media Patrol

Media patrol is started

Result of settings or user action. Normal.

Media patrol is completed Normal.

Media patrol is paused

Media patrol paused because of user intervention,
schedule or a higher priority background activity.

Media patrol is resumed

Media patrol has resumed again after a pause.

Media patrol is stopped

Media patrol stopped because of user intervention,
schedule or the logical drive was deleted or went
critical or offline.

Media patrol is aborted
due to an internal error.

System resources are low. Reduce system load or
restart the VTrak. See page 218.

Media patrol is queued

Media patrol has been set manually or by schedule.

Media patrol is stopped
internally

Media patrol stopped because the disk array was
deleted or removed.

Online Capacity Expansion

Online capacity
expansion has started

Result of settings or user action. Normal.

Event

Action

Summary of Contents for VTrack M-Class M200f



































































































































































































































































































































Search results

Summary of Contents for VTrack M-Class M200f

Reviews:

Brands by name

Popular brands

Promise Technology VTrack M-Class M200f, Product Manual

Search results

Summary of Contents for VTrack M-Class M200f

Reviews:

Brands by name

Popular brands