manualshive.com logo in svg

Promise Technology VTrack M-Class M200f, Product Manual

Share
Download
Promise Technology VTrack M-Class M200f Product Manual Download Page 244

VTrak M-Class Product Manual

236

Replace SEP – M300f/i/p and M200f/i/p

The Storage Enclosure Processor (SEP) manages the fans, audible alarm and 
battery, and monitors system voltages and cooling functions. No tools are 
required for this procedure.     

 

To remove and replace the SEP, do the following:

1.

Power down the VTrak.

2.

Grasp the handle and pull it toward you (above).

3.

Holding the handle, pull the SEP out of the enclosure.

4.

Gently slide the new SEP into the enclosure.

5.

Press on the screen to seat the SEP. The handle will swing in as the SEP is 
properly seated.

6.

Power up the VTrak.

This completes the Storage Enclosure Processor replacement procedure.

Caution

The SEP is NOT a hot-swappable device. Power-down the VTrak 
before removing it.

Important

Do not replace the SEP based on LED colors alone. Only replace 
the SEP when directed to do so by Promise Technical Support. 
See page 299.

Function LEDs

Release Handle

Summary of Contents for VTrack M-Class M200f



































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands