manualshive.com logo in svg

Promise Technology VTrack M-Class M200f, Product Manual

Share
Download
Promise Technology VTrack M-Class M200f Product Manual Download Page 12

VTrak M-Class Product Manual

4

All M-Class enclosures include a mid-plane, RAID controller, power and cooling 
units; and enclosure processor all in one cable-less chassis design. Multiple fans 
and power supplies provide redundancy to ensure continued usage during 
component failure. The RAID controller is hardware based and controls all logical 
drive functions transparently to the host system. VTrak appears to the computer’s 
operating system as a standard SCSI drive or drives. 

Features and Benefits 

Feature

Benefit

M500f/i/p: 3U 19-inch wide 
enclosure 

Installs easily in any standard rackmount.

M300f/i/p and M200f/i/p: 2U 19-
inch wide enclosure 

Installs easily in any standard rackmount.

Supports RAID levels 0, 1, 1E, 5, 
10, and 50

Allows system to be tuned for maximum 
performance.

Supports online logical drive 
(array) expansion

Lets you add disk drives to an existing 
logical drive without interrupting data 
accessibility

Supports online RAID migration

Allows you to convert a logical drive from 
one RAID level to another without 
interrupting data accessibility

Supports Serial ATA drives

Allows you to use existing SATA disk drives.

Supports logical drive migration 
from other Promise RAID products

Allow you to seamlessly move your existing 
logical drives to VTrak without recreating 
them.

S.M.A.R.T. monitoring

Warns of disk drive degradation and 
potential failure. 

Up to 25K IOPS (over two Fibre 
Channel or two iSCSI ports)

High processing rate.

1 Gb or 2 Gb sustained bandwidth 
(Fibre Channel)

High data thoughput.

Up to 1 Gb/sec sustained 
bandwidth (iSCSI)

High data thoughput.

Summary of Contents for VTrack M-Class M200f



































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands