manualshive.com logo in svg

Promise Technology VTrack M-Class M200f, Product Manual

Share
Download
Promise Technology VTrack M-Class M200f Product Manual Download Page 284

VTrak M-Class Product Manual

276

Host-interface controller 
settings have changed

Result of user action. Normal.

Fibre Channel

Fibre Channel controller 
has detected bus reset

The initiator sent a reset command. If this message 
appears repeatedly, contact Technical Support. See 
page 299.

Fibre Channel controller 
has received a LUN reset 
command.

Result of user action. Normal.

Fibre Channel controller 
has encountered a fatal 
error

Restart the VTrak. See page 218. If this message 
appears repeatedly, contact Technical Support. See 
page 299.

Fibre Channel link is up

FC link connected and ready. Normal.

Fibre Channel link is 
down

FC link disconnected or otherwise not working.

Fibre Channel controller 
settings have changed

Result of user action. Normal.

iSCSI

iSCSI link is up

iSCSI link connected and ready. Normal.

iSCSI link is down

iSCSI link disconnected or otherwise not working.

Logical Drive

Logical drive initialization 
has started

Result of user action. Normal.

Logical drive initialization 
has completed

Logical drive is ready to use. Normal.

Logical drive initialization 
has paused

Initialization paused because of user intervention, 
schedule or a higher priority background activity.

Logical drive initialization 
has resumed

Initialization has resumed again after a pause.

Logical drive initialization 
has stopped

Initialization stopped because of user intervention, 
schedule or the logical drive was deleted or went 
critical or offline.

Logical drive initialization 
marks the logical drive 
offline

Initialization failure due to a failed disk drive. Replace 
the disk drive, delete and recreate the logical drive. 
See page 16 and page 135.

Event

Action

Summary of Contents for VTrack M-Class M200f



































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands