manualshive.com logo in svg

Promise Technology VTrack M-Class M200f, Product Manual

Share
Download
Promise Technology VTrack M-Class M200f Product Manual Download Page 265

Chapter 7: Technology Background

257

2.

Delete the current logical drive.

See page 137 (WebPAM PROe) or page 188 (CLU).

3.

Create a new logical drive with the desired capacity.

See page 135 (WebPAM PROe) or page 187 (CLU).

4.

Restore the data to the new logical drive.

Media Patrol

Media Patrol is a routine maintenance procedure that checks the magnetic media 
on each disk drive. Media Patrol checks all physical drives assigned to disk 
arrays. Media Patrol does not check unconfigured drives.

Media Patrol will also check spare drives, if those drives have Media Patrol 
enabled. Media Patrol for spare drives is enabled by default. You can disable it in 
VTrak’s Command Line Interface (CLI).

Unlike Synchronization and Redundancy Check, Media Patrol is concerned with 
the condition of the media itself, not the data recorded on the media. If Media 
Patrol encounters a critical error, it triggers PDM if PDM is enabled.

See “Physical Drive Media Patrol” on page 128.

Predictive Data Migration (PDM)

Predictive Data Migration (PDM) is the migration of data from the suspect disk 
drive to a spare disk drive, similar to Rebuilding a Logical Drive. But unlike 
Rebuilding, PDM constantly monitors your disk drives and automatically copies 
your data to a spare disk drive 

before

 the disk drive fails and your Logical Drive 

goes Critical.

After the data is copied from the suspect disk drive, the controller marks it with a 
Stale configuration and a PFA error.

You can clear the Stale configuration and PFA error and put the disk drive back 
into service. See “Clear Physical Drive Conditions” on page 126 for WebPAM 
PROe or see “Clear Stale and PFA Conditions” on page 180 for the CLU. In most 
cases, however, you will remove the disk drive for repair or replacement.

PDM Triggers

The following actions trigger PDM:

•

A disk drive with unhealthy status (see below) 

•

Media Patrol finds a disk critical error* 

•

You initiate PDM manually 

*PDM also counts the number of media errors reported by Media Patrol. 

Summary of Contents for VTrack M-Class M200f



































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands