manualshive.com logo in svg

Promise Technology VTrack M-Class M200f, Product Manual

Share
Download
Promise Technology VTrack M-Class M200f Product Manual Download Page 207

Chapter 5: Management with the CLU

199

3.

Type Ctrl-A save your settings.

Target Information

1.

From the Main Menu, highlight 

SCSI Management

 and press Enter.

2.

Highlight one of the SCSI ports to select it and press Enter.

3.

Highlight 

Target Info

 and press Enter.

This screen displays a list of the 16 SCSI Targets for the selected SCSI channel.

To see information and statistics on an enabled SCSI Target, highlight the Target 
you want to see and press Enter.

Background Activity

Background activity refers to any of several functions that take place in the 
background while normal operation of the VTrak continues.

From the Main Menu, highlight 

Background Activity

 and press Enter. A count of 

current background activities appears, including:

•

Rebuild

•

PDM

•

Synchronization

•

Redundancy Check

•

Migration

•

Transition

•

Initialization

•

Media Patrol

Cautions

•

Turn off termination only when the VTrak is NOT the last 
device in the SCSI chain. 

•

Internal termination only works on the “Out” SCSI connectors.

Note

Enable Targets in the SCSI Channel Settings screen.

Summary of Contents for VTrack M-Class M200f



































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands