manualshive.com logo in svg

Promise Technology VTrack M-Class M200f, Product Manual

Share
Download
Promise Technology VTrack M-Class M200f Product Manual Download Page 122

VTrak M-Class Product Manual

114

The Controller Status 

 LED and Dirty Cache 

 LED on the back of the 

Controller, will flash for one minute. See the illustration below. 

Figure 6. The Controller Status and Dirty Cache LEDs flash for one minute 
so you can identify the Controller

Controller

Controller Information

The Controller–Information tab provides information about a specific VTrak 
subsystem controller. This information is useful for maintenance and 
troubleshooting. To access Controller information:

1.

Click the Subsystem 

 icon in Tree View. 

2.

Click the Controllers 

 icon. 

3.

Click on the Controller 

 icon. 

4.

Click on the Information tab in Management View. 

The Controller information includes:

•

Controller ID (1 or 2) 

•

Alias, if assigned* 

•

Vendor 

LEDs (Fibre Channel)

LEDs (iSCSI)

LEDs (SCSI)

Summary of Contents for VTrack M-Class M200f



































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands