manualshive.com logo in svg

Promise Technology VTrack M-Class M200f, Product Manual

Share
Download
Promise Technology VTrack M-Class M200f Product Manual Download Page 293

Chapter 8: Troubleshooting

285

Synchronization is 
queued

Synchronization is already running on another logical 
drive in the same array.

Synchronization is 
stopped internally

Synchronization stopped because the disk array was 
deleted or removed.

System (VTrak)

The system is started

The VTrak has been started.

The system is stopped

The VTrak was shut down.

Transition

Transition is started

Result of settings or user action. Normal.

Transition is completed

Normal.

Transition is paused

Transition paused because of user intervention, 
schedule or a higher priority background activity.

Transition is resumed

Transition has resumed again after a pause.

Transition is stopped

Transition stopped because of user intervention or 
the logical drive was deleted.

Transition was switched 
to rebuild

Transition changed to rebuild because the logical 
drive went critical.

Watermark

Migration has detected/
cleared stale NV 
Watermark

Watermarks are progress markers left as the result of 
interrupted RAID migrations. If the watermark was 
cleared, migration should finish.

Array was incomplete due 
to missing NV Watermark

RAID migration was interrupted by a shutdown. If 
array is online, try migration again. See page 137. If 
array is offline, delete and recreate array. See 
page 132 and page 131.

Event

Action

Summary of Contents for VTrack M-Class M200f



































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands