manualshive.com logo in svg

Promise Technology VTrack M-Class M200f, Product Manual

Share
Download
Promise Technology VTrack M-Class M200f Product Manual Download Page 199

Chapter 5: Management with the CLU

191

Network Management

Network Management deals with network connections and settings for VTrak’s 
Management Port and, on iSCSI models, the iSCSI ports. The other parameters 
specific to iSCSI, see “iSCSI Management” on page 195.

Management Port Settings

1.

From the Main Menu, highlight 

Network Management

 and press Enter.

2.

Highlight the management or iSCSI port you want and press Enter.

3.

Highlight 

NetMgmt Ethernet Port Settings

 and press Enter

The settings screen appears. You can enable DHCP or make settings 
manually.

DHCP

If you enable DHCP, IP Address, Subnet Mask and Gateway are set 
automatically.

1.

Highlight 

DHCP

 and press the spacebar to toggle to 

Enabled

.

2.

Press Ctrl-A to save your settings.

Manual

1.

Highlight 

DHCP

 and press the spacebar to toggle to 

Disabled

.

2.

Highlight each of the following and press the backspace key to erase the 
current value, then type the new value.

•

IP Address

•

Subnet Mask

•

Default Gateway IP Address

•

DNS Server IP Address

3.

Press Ctrl-A to save your settings.

iSCSI Port Settings

This feature applies to VTrak iSCSI models only.

1.

From the Main Menu, highlight 

Network Management

 and press Enter.

2.

Highlight the iSCSI port you want and press Enter.

3.

Highlight 

NetMgmt iSCSI Port Settings

 and press Enter.

The settings screen appears. You can enable DHCP or make settings 
manually.

Summary of Contents for VTrack M-Class M200f



































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands