Promise Technology VTrack M-Class M200f Product Manual Download Page 242

Page: 242 / 322

VTrak M-Class Product Manual

234

Detach the connector and lift the battery out of the bracket (above).

Place a new battery into the bracket and attach the connector.

Carefully slide the cooling unit into the enclosure.

Press on the screen to seat the cooling unit (above). The handle will swing in
as the cooling unit is properly seated.

Boot the VTrak and verify that the Battery LED is green.

This completes the battery replacement procedure.

Pull the battery
from the clip

Disconnect
the battery

Summary of Contents for VTrack M-Class M200f



































































































































































































































































































































Search results

Summary of Contents for VTrack M-Class M200f

Reviews:

Brands by name

Popular brands

Promise Technology VTrack M-Class M200f, Product Manual

Search results

Summary of Contents for VTrack M-Class M200f

Reviews:

Brands by name

Popular brands