Promise Technology VTrack M-Class M200f Product Manual Download Page 237

Page: 237 / 322

Chapter 6: Maintenance

229

Be sure the blowers point outward, towards the handle, as shown above.

10. Place the top section of the cooling unit onto the bottom section.

11. Tighten the thumbscrews.

12. Carefully slide the cooling unit into the enclosure.

13. Press on the screen to seat the cooling unit (above). The handle will swing in

as the cooling unit is properly seated.

14. Boot the VTrak and verify that the Fan LEDs are green.

This completes the fan replacement procedure.

Summary of Contents for VTrack M-Class M200f



































































































































































































































































































































Search results

Summary of Contents for VTrack M-Class M200f

Reviews:

Brands by name

Popular brands

Promise Technology VTrack M-Class M200f, Product Manual

Search results

Summary of Contents for VTrack M-Class M200f

Reviews:

Brands by name

Popular brands