manualshive.com logo in svg

Promise Technology VTrack M-Class M200f, Product Manual

Share
Download
Promise Technology VTrack M-Class M200f Product Manual Download Page 46

VTrak M-Class Product Manual

38

The current iSCSI Port settings are displayed (above).

To make iSCSI Port settings manually:

1.

Press the arrow keys to highlight 

DHCP

.

2.

Press the spacebar to toggle to 

Disabled

.

3.

Press the arrow keys to highlight 

IP Address

.

4.

Press the backspace key to erase the current IP Address.

5.

Type the new IP Address.

6.

Repeat the previous steps to specify the Subnet Mask, Gateway IP Address, 
and DNS Server IP Address.

If you do not have a DNS server, skip the DNS Server IP address.

7.

Press Ctrl-A to save these settings and move to the iSCSI Port 2 screen.

8.

Follow the same procedure to make settings for iSCSI Port 2.

9.

Press Ctrl-A to save these settings.

Exit the CLU

1.

Highlight 

Skip the Step and Finish

 and press Enter.

2.

Highlight 

Return to CLI

 and press Enter.

This completes the Management and iSCSI port setup. Go to “Install iSCSI 
Initiator on the Host PC” on page 39.

Summary of Contents for VTrack M-Class M200f



































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands