Promise Technology VTrack M-Class M200f Product Manual Download Page 187

Page: 187 / 322

Chapter 5: Management with the CLU

179

•

Battery Current – Positive during charge, negative during discharge

To recondition the battery:

Highlight

Recondition Battery

and press Enter.

Press Y to confirm.

Reconditioning the battery is a full discharge and recharge.

Locate Enclosure

This feature helps you identify the physical VTrak enclosure you are working with
through the CLU.

From the Main Menu, highlight

Subsystem Management

and press Enter.

Highlight

Enclosure Management

and press Enter.

Highlight

Locate Enclosure

and press Enter.

The LEDs on the front of the VTrak will blink for one minute.

Physical Drive Management

Physical Drive Management includes global and individual settings for physical
disk drives.

Global Physical Drive Settings

This screen enables you to make settings that apply to all physical drives in this
VTrak enclosure.

From the Main Menu, highlight

Physical Drive Management

and press Enter.

Highlight

Global Physical Drives Settings

and press Enter.

Write Cache

This feature enables/disables the write cache on all physical drives.

Highlight

Write Cache

and press the spacebar to toggle between

Enabled

and

Disabled

Press Ctrl-A to save your settings.

Read Ahead Cache

This feature enables/disables the read ahead cache on all physical drives.

Highlight

Read Look Ahead Cache

and press the spacebar to toggle

between

Enabled

and

Disabled

Press Ctrl-A to save your settings.

DMA Mode

This feature switches between UDMA and MDMA modes on all physical drives.

Summary of Contents for VTrack M-Class M200f



































































































































































































































































































































Search results

Summary of Contents for VTrack M-Class M200f

Reviews:

Brands by name

Popular brands

Promise Technology VTrack M-Class M200f, Product Manual

Search results

Summary of Contents for VTrack M-Class M200f

Reviews:

Brands by name

Popular brands