manualshive.com logo in svg

Promise Technology VTrack M-Class M200f, Product Manual

Share
Download
Promise Technology VTrack M-Class M200f Product Manual Download Page 189

Chapter 5: Management with the CLU

181

If a physical drive is offline and shows a PFA error, rebuild the disk array. Go to 
Disk Array Info and Settings. After rebuilding, the drive will show Stale. Run Clear 
Stale then run Clear PFA.

If the physical drive with a PFA error is a spare, you must delete the drive as a 
spare, then Clear PFA will be available.

After you clear a PFA error, watch for another PFA error to appear. If it does, 
replace the physical drive. 

Force Physical Drive Offline/Online

The Physical Drive–Force Offline/Online function enables you to force an:

•

Online physical drive to go Offline 

•

Offline physical drive to go Online 

The Force Offline/Online function appears only for physical drives that are 
assigned to disk arrays.

1.

From the Main Menu, highlight 

Physical Drive Management

 and press Enter.

2.

Highlight 

Global Physical Drives Settings

 and press Enter.

3.

Highlight the physical drive of your choice and press Enter.

4.

Highlight 

Force Offline

 or 

Force Online

 and press Enter.

5.

Press Y to confirm.

Locate Physical Drive

This feature helps you identify a physical drive within the VTrak enclosure you 
are working with through the CLU.

1.

From the Main Menu, highlight 

Physical Drive Management

 and press Enter.

2.

Highlight 

Global Physical Drives Settings 

and press Enter.

3.

Highlight the physical drive of your choice and press Enter.

4.

Highlight 

Locate Physical Drive

 and press Enter.

The drive carrier LEDs on the front of the VTrak will blink for one minute.

Caution

Forcing a physical drive offline or online is likely to cause data 
loss. Back up your data before you proceed. Use these functions 
only when required.

Summary of Contents for VTrack M-Class M200f



































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands