Promise Technology VTrack M-Class M200f Product Manual Download Page 198

Page: 198 / 322

VTrak M-Class Product Manual

190

The initialization parameters appear.

•

Initialization pattern. The default 00000000 is best for most applications

•

Quick Initialization – Yes means only the disk data format of the logical
drives are initialized.

•

Quick Initialization Rate – Enter a value or use the default 64 bits.

To change a parameter, highlight it and press the backspace key to erase the
current value, then type the new value.

Highlight

Start

and press Enter.

If necessary, you can pause and resume or stop and restart the Initialization.
You cannot access the logical drive until Initialization has finished.

Redundancy Check

This function is a maintenance procedure for logical drives in fault-tolerant disk
arrays that ensures all the data matches exactly.

Highlight

Background Activity

and press Enter.

Highlight

Start Redundancy Check

and press Enter.

The redundancy check parameters appear.

•

Auto Fix – Corrects inconsistencies automatically

•

Pause On Error – Pauses the Redundancy Check when an error is
found

To change a parameter, highlight it and press the backspace toggle between

Yes

and

Highlight

Start

and press Enter.

If necessary, you can pause and resume or stop and restart the Redundancy
Check. You can use the logical drive while Redundancy Check is running.

Locate Logical Drive

This feature helps you identify the physical drives assigned to the logical drive
you are working with in the CLU.

From the Main Menu, highlight

Logical Drive Management

and press Enter.

Highlight the disk array you want and press Enter.

Highlight

Locate Logical Drive

and press Enter.

The drive carrier LEDs pertaining to this logical drive will blink for one
minute.

Summary of Contents for VTrack M-Class M200f



































































































































































































































































































































Search results

Summary of Contents for VTrack M-Class M200f

Reviews:

Brands by name

Popular brands

Promise Technology VTrack M-Class M200f, Product Manual

Search results

Summary of Contents for VTrack M-Class M200f

Reviews:

Brands by name

Popular brands