manualshive.com logo in svg

Promise Technology VTrack M-Class M200f, Product Manual

Share
Download
Promise Technology VTrack M-Class M200f Product Manual Download Page 169

Chapter 5: Management with the CLU

161

The audible alarm sounds at other times to inform you that the VTrak needs 
attention. But the alarm does not specify the condition. When the alarm sounds, 
do the following:

•

Check the front and back of VTrak for red or amber LEDs, as described 
above.

•

If email notification is enabled, check for new messages.

•

Check the different functions in the CLU for component problems.

When a continuous tone sounds, there are multiple alarm patterns sounding at 
the same time. 

See “Chapter 8: Troubleshooting” on page 261 for diagnostic help.To make 
alarm settings, see “Buzzer” on page 214.

CLU Connection

There are two connections methods for the CLU:

•

Serial – Requires a null modem cable (included with VTrak) to connect the 
serial ports on the Host PC and VTrak 

•

Telnet – Requires a network connection between the Host PC and VTrak’s 
Management Port.

Serial Connection

Before you begin, be sure the null modem cable is connected between the Host 
PC and VTrak, and that both machines are booted and running.

1.

Start your PC’s terminal emulation program. 

2.

Press 

Enter

 once to launch the CLU. 

Telnet Connection

If your Telnet connection has not been setup, refer to “Set Up Serial Cable 
Connections” on page 25.

To start the telnet program:

1.

Go to the command line prompt (Windows) or click the terminal icon (Linux), 
then run:

telnet 192.168.1.56 2300

The IP address above is only an example. Use your VTrak's Management 
port IP address. 

2300

 is the Telnet port for the VTrak. 

The telnet login screen appears:

2.

At the Login prompt, type the user name and press Enter. 

Summary of Contents for VTrack M-Class M200f



































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands