VTrak M-Class Product Manual
180
1.
Highlight
DMA Mode
and press the spacebar to toggle through UDMA 0 – 5
and MDMA 0 – 2.
2.
Press Ctrl-A to save your settings.
Command Queuing
This function enables/disables the command queuing on all physical drives that
support this feature.
1.
Highlight
CmdQueuing
and press the spacebar to toggle between
Enabled
and
Disabled
.
2.
Press Ctrl-A to save your settings.
Individual Physical Drive Settings
This screen enables you to make settings that apply to individual physical drives
in this VTrak enclosure.
1.
From the Main Menu, highlight
Physical Drive Management
and press Enter.
2.
Highlight the physical drive of your choice and press Enter.
Alias
An alias is optional. To set an Alias for this physical drive:
1.
Type an alias into the Alias field.
Maximum of 32 characters. Use letters, numbers, space between words
and underscore.
2.
Press Ctrl-A to save your settings.
Advanced Information
To view advanced information about this physical drive, highlight
Advanced
Information
and press Enter.
Physical Drive Statistics
To view the statistics for this physical drive, highlight
Physical Drive Statistics
and
press Enter.
Clear Stale and PFA Conditions
The Clear Stale and Clear PFA functions only appear when those conditions exist
on the physical drive.
Highlight
Clear Stale
or
Clear PFA
and press Enter.
If a physical drive is still online and shows a PFA error but “Clear PFA” does not
appear, use PDM to copy the data to a new physical drive. Go to Disk Array Info
and Settings.
Summary of Contents for VTrack M-Class M200f
