manualshive.com logo in svg

Promise Technology VTrack M-Class M200f, Product Manual

Share
Download
Promise Technology VTrack M-Class M200f Product Manual Download Page 216

VTrak M-Class Product Manual

208

To stop any of these services:

1.

Highlight the service and press Enter.

2.

In the Service Setting screen, highlight 

Stop

 and press Enter.

To restart any of these services:

1.

Highlight the service and press Enter.

2.

In the Service Setting screen, highlight 

Restart

 and press Enter.

Email

1.

Highlight 

Email

 and press Enter.

2.

Highlight 

Startup Type

 and press the spacebar to toggle between 

Automatic

 

and 

Manual

.

3.

Highlight the following and press the backspace key to erase the current 
value, then type the new value:

•

Server IP address

•

Server Port number

4.

Highlight 

Authentication

 and press the spacebar to toggle between 

Yes

 and 

No

.

If you selected Yes, type in a User name and Password in the fields 
provided.

5.

The following items are optional but recommended. Highlight and press the 
backspace key to erase the current value, then type the new value:

•

Sender’s email address

•

Subject Line for the email message

6.

Press Ctrl-A to save your settings.

To start, stop or restart the Email service, highlight 

Start

, 

Stop

 or 

Restart

 and 

press Enter.

SLP

1.

Highlight 

SLP

 and press Enter.

2.

Highlight 

Startup Type

 and press the spacebar to toggle between 

Automatic

 

and 

Manual

.

3.

Press Ctrl-A to save your settings.

To start, stop or restart the Email service, highlight 

Start

, 

Stop

, or 

Restart 

and 

press Enter.

Webserver

1.

Highlight 

Webserver

 and press Enter.

Summary of Contents for VTrack M-Class M200f



































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands