Planmeca Proline CC, Technical Manual

Page: 31 / 207

Planmeca Proline CC panoramic x-ray C-1
Chapter
Technical Manual
C
HELP & ERROR MESSAGES
1 HELP MESSAGES
The following is a list of the help messages. These messages appear on the main display if a key
is pressed that has no function, or if the function is not allowed for some reason. The help mes-
sage disappear automatically when you release the key.
HELP CODE HELP MESSAGE EXPLANATION
H E 0 The key has no function in this mode.
H E 1 The key has no function with the control key.
H E 2 The error code must first be cleared from the display by pressing the control key.
H E 3 The unit must be driven to the ready position with the special program keys (in
Transversal slicing system mode).
H E 4 The patient positioning mechanism can be moved only in the manual transversal
slicing system mode.
H E 5 You are using a wrong secondary slot. Select an other slot.
H E 6 The temple support motor has been inactivated. The temple support movement
does not operate.
H E 7 The X-ray unit is not equipped with a Cephalostat.
H E 8 You can not change the horizontal segment, there is only one primary slot in the
panoramic mode.
In Transversal slicing system mode the primary slot is selected automatically.
H E 9 The soft tissue filter can not be moved when taking a posterior-anterior or ante-
rior-posterior exposure.
H E 1 0 The X-ray unit is busy, wait until the previous function is completed.
H E 1 5 The x-ray unit is not communicating with the PC, e.g. the Dimaxis software is not
running.
H E 1 6 The patient is not selected in the Dimaxis software.
H E 1 7 The sensor head is not in its position.
H E 1 8 In the cephalometric mode there is also a sensor head in the rotating unit in addi-
tion to the sensor head attached to the cephalostat. Remove the sensor head
from the rotating unit.
H E 1 9 The unit exposure mode (panoramic/cephalometric) differs from the mode
selected in the Dimaxis software.