NewFEIMAS
Refer to Revision Record on page 2.
T.Anzai
Nov. 20, 2008
K.Okada
Rev
04
03
PAGE
87
/
138
PFU LIMITED
P1PA03334-B30X/6
Refer to Revision Record on page 2.
T.Anzai
July 7, 2008
K.Okada
Refer to Revision Record on page 2.
K.Okada
K.Okada
DESCRIPTION
CHECK
DATE
T.Anzai
APPR.
K.Okada
K.Okada
Aug.19, 2005
DESIG
N
DESIG
.
CUST.
I.Fujioka
I.Fujioka
T.Anzai
CHECK
fi-5530C/fi-5530C2
IMAGE SCANNER
MAINTENANCE MANUAL
APPR.
TITLE
DRAW.
No.
Feb.23, 2007
05
Section 4-10-4
4-10-4. Replacing the Inverter SR (for front side scanning)
As the dust-proof area in the scanner is opened by the following procedure, do not replace the following parts in a dusty
room.
P/N of replacement part is described in
Section 6-4
.
<Removing>
(1) Remove Chute unit (ADF paper chute), Stacker unit, PCB unit,
Rear cover, Upper cover and Guide A ASSY by referring Sections
from
4-7-1
to
4-7-6
.
(2) Remove the Dust cover by referring to
Section 4-10-3
.
(3) Remove two connectors from the Inverter SR that is attached to the
inner side of the Dust cover. And release a craw to remove the
Inverter SR.
<Mounting>
Follow the removing procedure in reverse. The cable from the Lamp SR shall be routed as shown in the figure above.
Inverter SR
A claw
Two connectors
