NewFEIMAS
Refer to Revision Record on page 2.
T.Anzai
Nov. 20, 2008
K.Okada
Rev
04
03
PAGE
22
/
138
PFU LIMITED
P1PA03334-B30X/6
Refer to Revision Record on page 2.
T.Anzai
July 7, 2008
K.Okada
Refer to Revision Record on page 2.
K.Okada
K.Okada
DESCRIPTION
CHECK
DATE
T.Anzai
APPR.
K.Okada
K.Okada
Aug.19, 2005
DESIG
N
DESIG
.
CUST.
I.Fujioka
I.Fujioka
T.Anzai
CHECK
fi-5530C/fi-5530C2
IMAGE SCANNER
MAINTENANCE MANUAL
APPR.
TITLE
DRAW.
No.
Feb.23, 2007
05
Section 1-6-1
1-6 Basic Operation
1-6-1 Power ON/OFF
(1) Turning ON the power
Press the power button on the operator panel.
The scanner is turned ON, and the green LED on the operator panel
lights.
During the initialization, the indication of the Function No. Display
changes as follows:
“8”
“P” “0” “1”
The indication “1” means that the operator panel is in the ready
status.
(2) Turning OFF the power
Hold the power button at least two seconds.
Power Save Mode
The Power Save mode keeps the scanner in a low-powered state if no operation is performed on the scanner for 15
minutes after it has been turned ON. The scanner is automatically switched to the Power Save mode.
In the Power Save mode, the indication of the Function No. display on the operator panel goes out, while the green
LED is kept lit.
To return the scanner from the Power Save mode, perform one of the following operations:
- Load documents on the ADF paper chute (Chute unit).
- Press any button on the operator panel.
The scanner will be turned OFF when pressing down the power button for two seconds.
- Execute a command from the scanner driver.
