NewFEIMAS
Refer to Revision Record on page 2.
T.Anzai
Nov. 20, 2008
K.Okada
Rev
04
03
PAGE
48
/
138
PFU LIMITED
P1PA03334-B30X/6
Refer to Revision Record on page 2.
T.Anzai
July 7, 2008
K.Okada
Refer to Revision Record on page 2.
K.Okada
K.Okada
DESCRIPTION
CHECK
DATE
T.Anzai
APPR.
K.Okada
K.Okada
Aug.19, 2005
DESIG
N
DESIG
.
CUST.
I.Fujioka
I.Fujioka
T.Anzai
CHECK
fi-5530C/fi-5530C2
IMAGE SCANNER
MAINTENANCE MANUAL
APPR.
TITLE
DRAW.
No.
Feb.23, 2007
05
Section 3-3
3-3 Troubleshooting
When a temporary error or an alarm occurs, find the troubleshooting procedure from the list in this section and go to the
related section for maintenance. Before starting the troubleshooting, get the following information from your customer to
understand whether the error is scanner-related or system-related.
•
Is the scanner operated correctly?
•
Are the fault symptoms reproducible or persistent?
(Check if the target scanner causes the same error under other systems.)
The troubleshooting should be conducted from item number 1 to the last item number in a table.
Continue the troubleshooting until the error is removed.
Following lists the case of troubleshooting described later in this section.
Error
category
Error description
Related
section
Remarks
Scanner does not turn ON. (Display of the operator panel goes out)
3-3-1
Scanning does not start.
3-3-2
Device
Scanned image is distorted.
3-3-3
Resolution or gradation of scanned image is unsatisfactory.
3-3-4
Too much jitter on scanned image with ADF scanning
3-3-5
Scanned image is misaligned with ADF scanning
3-3-6
Scan magnification factor abnormal with ADF scanning
3-3-7
Vertical streaks appear in scanned image
3-3-8
Image
When calibrating color of scanned image
3-3-9
Frequent “U1: paper jam error”
3-3-10
Error detection of “No paper on the Chute unit”
3-3-11
Error detection of “U4: ADF cover open”
3-3-12
Temporar
y error
Frequent “U2: multi feed error”
3-3-13
“E2 or E3: Optical alarm”
3-3-14
“E4: Motor fuse blown”
3-3-15
(Reserved) (3-3-16)
“E6: Operator panel alarm”
3-3-17
“E7: EEPROM alarm”
3-3-18
“E8: SCSI fuse blown”
3-3-19
“E9: Image memory alarm”
3-3-20
“EA: Imprinter error”
3-3-21
“Ec: RAM alarm”
3-3-22
“Ed: SPC alarm”
3-3-23
Alarm
“EF: Background changeover alarm”
3-3-24
