NewFEIMAS
Refer to Revision Record on page 2.
T.Anzai
Nov. 20, 2008
K.Okada
Rev
04
03
PAGE
109
/
138
PFU LIMITED
P1PA03334-B30X/6
Refer to Revision Record on page 2.
T.Anzai
July 7, 2008
K.Okada
Refer to Revision Record on page 2.
K.Okada
K.Okada
DESCRIPTION
CHECK
DATE
T.Anzai
APPR.
K.Okada
K.Okada
Aug.19, 2005
DESIG
N
DESIG
.
CUST.
I.Fujioka
I.Fujioka
T.Anzai
CHECK
fi-5530C/fi-5530C2
IMAGE SCANNER
MAINTENANCE MANUAL
APPR.
TITLE
DRAW.
No.
Feb.23, 2007
05
Section 5-1-7
5-1-7 Maintenance mode #6: Miscellaneous information display
In this mode, the following information counter is displayed:
•
Firmware version number
•
Starting date of the scanner *
•
The accumulated number of paper that have been scanned by ADF
•
Error/Alarm history
*: This indicates the date when the scanner is activated by the driver first. This information is only available if the driver
supports this function.
[How to start]
(1) Select (Maintenance mode #6) by pressing Function button at Screen T04, and then press Scan button. The scanner
shows a number that shows the current selection of information to display. The number indicates the information type as
follows.
Function No.
Display
Display
Remarks
0 Firmware
version
Default
1
Starting date of the scanner
2
The accumulated number of paper scanned by ADF
3 (Reserved)
4 Error/Alarm
history
(2) Change the selection by pressing Function button.
(3) The information is displayed as follows when pressing Scan button.
Information
Display
Firmware version number The firmware version number is displayed in 4 digits from left digits to right digits,
following the symbol “-“.
e.g. When the version is “A00” (*1), “A” is converted to “01 ” (*2), so the scanner
displays “-0100 ” in the following order:
“-”
“0” “1 ” “0” “0”
Starting date
Starting date of the scanner is displayed in 6 digits, 2 digits for “Year (Christian
calendar)”, 2 digits for “Month”, and 2 digits for “Date”, following the symbol “-“.
You cannot reset the date.
e.g. When the starting date is January 31st, 2002, “020131” is displayed in the
following order:
“-”
“0” “2” 0 “1” “3” “1”
The accumulated number
of paper scanned by ADF
The accumulated number of paper scanned by ADF is displayed in 8 digits from left
digits to right digits, following the symbol “-“. (If the counter does not reach 8
digits, 0 is added to blank digits.)
The counter displays “0” until it reaches 500, and increases in 10 increments after
500. You cannot reset this counter.
e.g. When the accumulated number is “16,245”, “00016245” is displayed in the
following order:
“-”
“0” “0” “0” “1” “6” “2” “4” “5”