NewFEIMAS
Refer to Revision Record on page 2.
T.Anzai
Nov. 20, 2008
K.Okada
Rev
04
03
PAGE
82
/
138
PFU LIMITED
P1PA03334-B30X/6
Refer to Revision Record on page 2.
T.Anzai
July 7, 2008
K.Okada
Refer to Revision Record on page 2.
K.Okada
K.Okada
DESCRIPTION
CHECK
DATE
T.Anzai
APPR.
K.Okada
K.Okada
Aug.19, 2005
DESIG
N
DESIG
.
CUST.
I.Fujioka
I.Fujioka
T.Anzai
CHECK
fi-5530C/fi-5530C2
IMAGE SCANNER
MAINTENANCE MANUAL
APPR.
TITLE
DRAW.
No.
Feb.23, 2007
05
Section 4-9-8
4-9-8. Replacing the Upper Frame ASSY
As the dust-proof area in the scanner is opened by the following procedure, do not replace the following parts in a dusty
room.
Refer to
Section 6-15
for the part number of the replacement part.
<Removing>
(1) Remove Chute unit (ADF paper chute), Stacker unit, PCB unit, Rear cover and Upper cover by referring to Sections from
4-7-1
to
4-7-5
.
(2) Remove the Upper unit y referring
Section 4-8
.
(3) Remove the Optical unit (OPT unit with Cable B) by referring to
Section 4-9-3
.
The remainder is Upper unit. Upper Frame ASSY includes following parts.
- Lamp SR, Inverter SR
- YS sensor, sensor EM, Sensor PICK, Sensor TOP
- LF Motor, Pulley, Timing belt, Roller, Frame, Pad ASSY
- Cables
<Mounting>
(1) Follow the removing procedure in reverse. If the glass in the Upper unit is dirty, especially inside, clean it with a dry
lint-free cloth.
(2) After mounting the parts, run the Offset adjustment (
Section 5-1-4
) and the Magnification adjustment (
Section 5-1-3
) for
ADF back scanning, and the White level adjustment (
Section 5-1-5
) for ADF front/back scanning.
(3) Check the sensor performance by Maintenance mode #1 in
Section 5-1-2
.
