NewFEIMAS
Refer to Revision Record on page 2.
T.Anzai
Nov. 20, 2008
K.Okada
Rev
04
03
PAGE
97
/
138
PFU LIMITED
P1PA03334-B30X/6
Refer to Revision Record on page 2.
T.Anzai
July 7, 2008
K.Okada
Refer to Revision Record on page 2.
K.Okada
K.Okada
DESCRIPTION
CHECK
DATE
T.Anzai
APPR.
K.Okada
K.Okada
Aug.19, 2005
DESIG
N
DESIG
.
CUST.
I.Fujioka
I.Fujioka
T.Anzai
CHECK
fi-5530C/fi-5530C2
IMAGE SCANNER
MAINTENANCE MANUAL
APPR.
TITLE
DRAW.
No.
Feb.23, 2007
05
Section 5-1-3
5-1-3 Maintenance mode #2: Main scanning / Sub-scanning magnification adjustment
In this mode, the magnification correction values for main/sub scanning are automatically calculated to satisfy the following
adjustment value.
Adjustment value
Main scanning: Within ±1.0%
Sub scanning: Within ±1.0% (Without stop and start during scanning)
: Within ±2.0% (With stop and start during scanning)
Before this adjustment, please prepare the A3-size white sheet described in Figure 5-1-3.
[How to start]
(1) Select (Maintenance mode #2) by pressing Function button at screen T04, and then press Scan button. The scanner
shows a number that is currently selected adjustment area. The number indicates the area of magnification adjustment as
follows.
Function No.
Display
Magnification to be adjusted
Remarks
0
ADF sub- scanning magnification adjustment
Default
1
ADF main scanning magnification adjustment (front)
2
ADF main scanning magnification adjustment (back)
(2) Select the magnification you want to change by pressing Function button.
(3) Set the adjustment test sheet on the Chute unit (ADF paper chute), and adjust the side guide to the width of the test sheet.
Set the test sheet facing down on the Chute unit (ADF paper chute) for the ADF front adjustment, and facing up for the
ADF back adjustment. Press Scan button to start the adjustment.
[How to end]
Press Send to button during operation. The operation stops and the Maintenance mode selection Screen T04 appears.
