NewFEIMAS
Refer to Revision Record on page 2.
T.Anzai
Nov. 20, 2008
K.Okada
Rev
04
03
PAGE
68
/
138
PFU LIMITED
P1PA03334-B30X/6
Refer to Revision Record on page 2.
T.Anzai
July 7, 2008
K.Okada
Refer to Revision Record on page 2.
K.Okada
K.Okada
DESCRIPTION
CHECK
DATE
T.Anzai
APPR.
K.Okada
K.Okada
Aug.19, 2005
DESIG
N
DESIG
.
CUST.
I.Fujioka
I.Fujioka
T.Anzai
CHECK
fi-5530C/fi-5530C2
IMAGE SCANNER
MAINTENANCE MANUAL
APPR.
TITLE
DRAW.
No.
Feb.23, 2007
05
Section 4-7-5
4-7-5. Removing/Mounting the Upper cover
<Removing>
(1) Remove Panel PCA by referring to
Section 4-9-1
.
Note: It is not necessary to save EEPROM data in the Control PCA, if Panel PCA will not be replaced.
(2) Open the ADF. Turn a pulley in the direction of arrow in the
right figure. And let the Pick-link plate move to front position
as shown in the following figure. Then detach four link shafts
from the ADF.
(3) Remove two screws (Self-tapping screw) from TOP
cover
(4) Open the ADF a little, and open Upper cover by about 2 cm. Push
Upper cover in E direction and press B portion down to unlock the
craws inside of the cover. Then detach the Upper cover
After removing the Upper cover, please attach an adhesive tape on
the Optical unit to prevent it falling down as shown figure right.
Also, when attaching Upper cover, remove this adhesive tape.
Two screws
Pulley
Link shafts
Pick link plate
Material marking shall
be opposite side.
Link shafts
E
Craws
Upper cover
B
About
2 cm
Adhesive tape
