NewFEIMAS
Refer to Revision Record on page 2.
T.Anzai
Nov. 20, 2008
K.Okada
Rev
04
03
PAGE
25
/
138
PFU LIMITED
P1PA03334-B30X/6
Refer to Revision Record on page 2.
T.Anzai
July 7, 2008
K.Okada
Refer to Revision Record on page 2.
K.Okada
K.Okada
DESCRIPTION
CHECK
DATE
T.Anzai
APPR.
K.Okada
K.Okada
Aug.19, 2005
DESIG
N
DESIG
.
CUST.
I.Fujioka
I.Fujioka
T.Anzai
CHECK
fi-5530C/fi-5530C2
IMAGE SCANNER
MAINTENANCE MANUAL
APPR.
TITLE
DRAW.
No.
Feb.23, 2007
05
Section 1-7-1
1-7 Daily Care
This section describes how to clean each part of the scanner.
WARNING
The glass surface inside the ADF becomes hot during the operation of the scanner. Before you start to clean the inner parts
of the scanner, disconnect the AC adapter from the power outlet, and wait at least 15 minutes.
Do not turn off the scanner when you clean the Feed Rollers and Eject rollers.
Clean the ADF after every 5,000 scans. Without periodical cleaning, document feeding or transportation may be troubled.
The scanner must be cleaned more frequently if you scan any of the following type of sheets:
- Documents of coated paper
- Documents that are almost completely covered with printed text or graphics
- Chemically treated documents such as carbonless paper
- Documents containing a large amount of calcium carbonate
- Documents written by pencil
- Documents on which the toner is not fused sufficiently
1-7-1 Cleaning ADF
1. Open the ADF while pushing down the ADF button.
Caution: Be careful, the ADF cover may close and pinch your fingers.
2. Clean the following locations with a lint-free
cloth moistened with ethyl alcohol isopropyl
alcohol.
