NewFEIMAS
Refer to Revision Record on page 2.
T.Anzai
Nov. 20, 2008
K.Okada
Rev
04
03
PAGE
17
/
138
PFU LIMITED
P1PA03334-B30X/6
Refer to Revision Record on page 2.
T.Anzai
July 7, 2008
K.Okada
Refer to Revision Record on page 2.
K.Okada
K.Okada
DESCRIPTION
CHECK
DATE
T.Anzai
APPR.
K.Okada
K.Okada
Aug.19, 2005
DESIG
N
DESIG
.
CUST.
I.Fujioka
I.Fujioka
T.Anzai
CHECK
fi-5530C/fi-5530C2
IMAGE SCANNER
MAINTENANCE MANUAL
APPR.
TITLE
DRAW.
No.
Feb.23, 2007
05
Section 1-2-5
1-2-5 Multi feed detection condition
One of the following method of multi feed detection is selected by the driver.
-
Check overlapping
-
Check length
-
Check overlapping and length
The following condition is required for each selection:
1) Check overlapping
-
Paper weight: 52g/m
2
- 127g/m
2
-
Punched holes are not allowed within 35 mm (1.4 in) of the vertical centerline of the document.
-
Other paper shall not be glued within 35 mm (1.4 in) of the vertical centerline of the document.
2) Check length
-
Document length deviation: 1 % or less
-
Punched holes are not allowed within 35 mm (1.4 in) of the vertical centerline of the document.
3) Check overlapping and length
-
Paper weight: 52g/m
2
- 127g/m
2
-
Document length deviation: 1 % or less
-
Punched holes are not allowed within 35 mm (1.4 in) of the vertical centerline of the document.
-
Other paper shall not be glued within 35 mm (1.4 in) of the vertical centerline of the document.
When the overlapping check is specified, the papers which contact closely each other, such as glued paper or
electro-statically charged paper, can result in the miss-detection of multi feed.
1-2-6 Condition for automatic document size detection
Document with following condition may not be detected its size correctly.
- Thin paper less than 52g/m
2
- Shape is other than square
- Document which edges are colored dark.
