Radio Shack PRO-67 Operation Download Page 1

Page: 1 / 32

PRO-67 Scanner

(200-0512) Operation Faxback Doc. # 38891

TURNING ON THE SCANNER AND SETTING SQUELCH

1. Turn SQUELCH fully clockwise.

2. Turn VOLUME/OFF clockwise until it clicks. The scanner automatically

scans the programmed channels from selected banks.

3. Press MAN (Manual) to stop scanning. The display shows the current

channel and the channel's frequency (or all zeroes if the channel is

empty).

4. Turn VOLUME/OFF clockwise to set the scanner's volume about halfway.

5. Slowly turn SQUELCH counterclockwise until you hear a hissing sound.

6. Adjust VOLUME/OFF to a comfortable listening level.

7. Slowly turn SQUELCH clockwise until the hissing sound stops.

Note:

If you want to listen to a weak or distant station, turn SQUELCH

counterclockwise to increase receiver sensitivity. If reception is

poor, turn SQUELCH clockwise to decrease sensitivity.

PERMANENTLY STORING KNOWN FREQUENCIES

Summary of Contents for PRO-67

































Search results

Summary of Contents for PRO-67

Reviews:

Related manuals for PRO-67

Brands by name

Popular brands

Radio Shack PRO-67, Operation

Search results

Summary of Contents for PRO-67

Reviews:

Related manuals for PRO-67

Brands by name

Popular brands