Radio Shack PRO-67 Operation Download Page 5 | Manualshive

Page: 5 / 32

background image

Direct Search

Direct search lets you search up or down from the currently displayed

frequency.

1. Press MAN.

2. Use the number keys and CLEAR/. to enter the frequency (including the

decimal point) where you want to start the search, or enter the

channel number containing the starting frequency, then press MAN

again.

3. Press DOWN Arrow to search downward or UP Arrow to search upward from

the selected frequency. -d-, SEARCH, and DOWN or UP Arrow appear on

the display.

4. When the scanner stops on a transmission, quickly press:

ON to store the displayed frequency into the current monitor memory,

or

DOWN or UP Arrow to continue searching, or

0/HOLD to stop searching so you can listen to the transmission.

-h- appears on the display

To release hold and continue searching, hold down l-/HOLD, DOWN or

UP Arrow for more than 1 second.

Notes:

«
...
3
4
5
6
7
...
»

Summary of Contents for PRO-67

































Reviews:

No comments

Related manuals for PRO-67

imageFormula DR-C125

Brand: Canon Pages: 68

imageFORMULA DR-M140

Brand: Canon Pages: 56

imageFormula DR-C125

Brand: Canon Pages: 68

ImageFormula DR-9080C

Brand: Canon Pages: 4

ImageFormula DR-7080C

Brand: Canon Pages: 2

IMAGE FORMULA DR-6010C

Brand: Canon Pages: 4

DR-X10C - imageFORMULA - Document Scanner

Brand: Canon Pages: 67

Brand: Canon Pages: 6

N670U - CanoScan Flatbed Scanner

Brand: Canon Pages: 19

Brand: Canon Pages: 21

imageFORMULA DR-7580

Brand: Canon Pages: 4

ImageFormula DR-7080C

Brand: Canon Pages: 112

imageFORMULA DR-3080C

Brand: Canon Pages: 60

imageFORMULA DR-1210C

Brand: Canon Pages: 2

imageFORMULA DR-1210C

Brand: Canon Pages: 98

CR-25 - imageFORMULA Desktop Check Scanner

Brand: Canon Pages: 72

imageFORMULA DR-S150

Brand: Canon Pages: 22

imageFORMULA DR-M140

Brand: Canon Pages: 126

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands