2-69
VU-ACD™/100 Maintenance Guide – Host/DOS
Maintenance Utilities
Step
Prompt
Action
12
The kernel environment includes device node files and /etc/inittab.
The new kernel may require changes to /etc/inittab or device nodes.
Do you want the kernel environment
rebuilt? (y/n)
The kernel has been successfully linked
and installed.
To activate it, reboot your system.
Setting up new kernel environment
Type
y
and press
Enter
.
13
In order for the changes to be reflected on your emergency boot floppy set, it is
recommended that you run the command ‘/etc/mkdev fd’ and re-create the emergency boot
floppy set with the newly linked kernel.
Press <ENTER> when ready
Press
Enter
.
14
SYSTEM HARDWARE CONFIGURATION
1) Node Configuration
2) Maintenance Modem Configuration
3) Tape Configuration
4) Multiport Serial I/O Configuration
5) System Printer Configuration
6) Reset All External Displays
Select an option or ‘q’ to quit:
Type
q
and press
Enter
.
15
MAINTENANCE MENU
1) Shut Down ACD MIS
2) Shut Down ACD MIS & UNIX System
3) Tape Backup/Restore Utilities
4) System Logs
5) Load Management Limits
6) Change Maintenance Logon Password
7) System Hardware Configuration
8) Install a Software Update
9) Request Switch Initialization
10) 5ESS Provisioning
11) List Logged-In Users
Select an option, or enter q to quit:
To reboot the system, type
2
and press
Enter
to
select Shut Down ACD MIS & UNIX System.
Refer to Section 2.1.2.2 for details about the
reboot procedure.
