manualshive.com logo in svg

Perimeter Technology VU-ACD /100, Maintenance Manual

Share
Download
Perimeter Technology VU-ACD /100 Maintenance Manual Download Page 178

5-26

Configuration Changes

VU-ACD™/100 Maintenance Guide – Host/DOS

5.5.2.11

Schedule Port

 

(continued

)

Step

Description

Reference

3

Install the datacomm connection between the VU-ACD/100
host and the FMS host, or between the VU-ACD/100 remote
terminal and the FMS host.

FMS Documentation Set

Host Installation Guide

4

Use the VU-ACD/100 Device Configuration screen to
configure the new Schedule port.

System Administration Gd.

5

Verify that Schedule data is being up-/downloaded to/from
the FMS.

FMS Documentation Set

Host Installation Guide

5.5.2.12

InterLink Port

Step

Description

Reference

1

Assign the serial port on the DigiBoard to which the Inter-
Link data will be output.

IMPORTANT:  To enable output, the security device must be
programmed to allow an InterLink output port to be
assigned. For additional information contact Perimeter
Technology Product Support.

Host Installation Guide

2

Install a serial datacomm or LAN connection between the
VU-ACD/100 host with the InterLink output and the
VU-ACD/100 host which will receive the data.

Host Installation Guide

3

Use the VU-ACD/100 Device Configuration screen at the
sending VU-ACD/100 host to configure the new InterLink
output port.

System Administration Gd.

4

At the receiving VU-ACD/100 host, use System Hardware
Option–Node Configuration under the Maintenance Menu to
configure the InterLink input port.

Maintenance Guide

5

Use the Link Log and Event Log options under the Mainte-
nance Menu to verify that fedlog data is being received at
the receiving VU-ACD/100 host.

Maintenance Guide

Summary of Contents for VU-ACD /100

































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands