2-27
VU-ACD™/100 Maintenance Guide – Host/DOS
Maintenance Utilities
Step
Prompt
Action
?
Steps 4 thru 8 describe the general process for changing Load Management Limits.
Group Names and Directory Numbers are read from the system database. Default
Minimum <min> and maximum <max> values are listed in Table 2.2 for each Load
Management parameter.
4
Group
Directory
<Parameter>
Name
Number
Minimum
Maximum
1) <Grp Name1>
<DN1>
<min>
<max>
2) <Grp Name2>
<DN2>
<min>
<max>
3) <Grp Name3>
<DN3>
<min>
<max>
4) <Grp Name4>
<DN4>
<min>
<max>
5) <Grp Name5>
<DN5>
<min>
<max>
6) <Grp Name6>
<DN6>
<min>
<max>
7) <Grp Name7>
<DN7>
<min>
<max>
8) <Grp Name8>
<DN8>
<min>
<max>
Select a group (by number) or enter q to
quit:
Type the number corresponding to the ACD
Group for which you wish to change limits and
press
Enter
. Proceed to Step 5.
– or –
Type
q
and press
Enter
to return to the
Maintenance Menu.
5
Group <Grp.Name>, Directory Number
<DN>
Enter new <Parameter> minimum value
or q to quit (old value = <min>)
Refer to Table 2.2 and type a new minimum
value and press
Enter
. Proceed to Step 6
6
Enter new <Parameter> maximum
value or q to quit (old value = <max>)
Refer to Table 2.2 and type a new maximum
value and press
Enter
. The screen for the
selected Load Management Parameter
reappears.
7
(<Parameter> Screen)
Select another group and repeat Steps 5 and 6
to change limits. When limits have been
modified for all desired groups, type
q
and
press
Enter
to return to the Load Management
Parameters Screen.
8
(Load Management Parameters Screen)
Select another parameter and repeat Steps 4
thru 6 for the new parameter. Continue select-
ing parameters and changing limits until all
modifications have been completed.
Type
q
and press
Enter
to return to the Mainte-
nance Menu.
