2-65
VU-ACD™/100 Maintenance Guide – Host/DOS
Maintenance Utilities
Step
Prompt
Action
11
(cont.)
IMPORTANT: Refer to the DigiWARE
documentation supplied with the Digi-
Board product for specific installation
procedures when using the MPI interface.
Review the board configuration displayed on
the screen. Verify that the parameters shown
match those actually configured for this host
adapter type.
To change a data entry use the Up/Down
Arrow keys to highlight a field you wish to
change. Press the
Space Bar
to toggle through
available choices.
– or –
With the field highlighted, press
F2
to display
a list of options. Use the Up/Down Arrow
keys to highlight a selection and press
Enter
.
Press
F4
to show the DIP Switch configuration
settings for the selected board type.
When all changes have been made, press
F5
to
exit and save changes.
12
Sample Board Configuration Screen – Xem Family
Module Configuration
PORTS Module 1:
PORTS/16em
|
|
Host Adapter
|–– ttyaxx
|
|
Review the module configuration displayed on
the screen. Verify that the module or concen-
trator type is what is actually connected to the
host adapter. The diagram in the lower right
portion of the screen shows the connectivity
between the host adapter and modules/-
concentrators.
Press the
Space Bar
to toggle through avail-
able module/concentrator types.
Press
F5
to exit and save changes.
13
DScreen/Altpin
Do you wish to install DigiScreen?
Altpin setting. Off
When all changes have been made, press
F5
to
exit and save changes.
Type
n
and press
Enter
.
Press
Enter
to disable Altpin (Altpin=Off).
