2-44
Maintenance Utilities
VU-ACD™/100 Maintenance Guide – Host/DOS
Step
Prompt
Action
3C
Change InterLink Input connection type
to Serial (y/n) ?
Type
y
an d press
Enter
.
MODIFY InterLink INPUT CONFIGURATION for Node <n>
List of configured serial tty devices
Note: although configured, devices may not
be available to use. Ensure that a serial device
is available prior to assigning it.
ttyi1B
ttyi1H
ttyi2A
ttyi2B
ttyi2d
ttyi2e
ttyi2f
ttyi2g
[default: ttyi2A ] : [ ]
Does this device require modem control
(y/n) ?
Type the serial port number to be assigned for
this node and press
Enter
.
Type
y
and press
Enter
to assign modem
control. Otherwise, type
n
and press
Enter
.
INTERLINK INPUT CONFIGURATION ASSIGNMENT for NODE <n>
Node Description
InterLink Input
Port
/dev/ttyA13
Baud rates supported are:
1) 4800
2) 9600
3) 19200
Select the baud rate: [ ]
Type the number corresponding to the desired
baud rate and press
Enter
. The View/-Modify
InterLink Input Configuration Menu reappears.
Choose another node configuration parameter
to change or proceed to Step 4.
4
Select a parameter to modify or “q” to
quit:
Save the modifications (y/n) ?
Type
q
and press
Enter
to quit the View/-
Modify InterLink Input Configuration Menu.
Type
y
and press
Enter
to save the changes
made to this menu before returning to the
View/Modify Node Configuration Menu.
Proceed to Step 5.
– or –
Type
n
and press
Enter
to return to the View/-
Modify Node Configuration Menu without
saving changes made to this menu. Proceed to
Step 5.
5
<System Hardware Options Menu>
Type
q
and press
Enter
to return to the Mainte-
nance Menu.
