manualshive.com logo in svg

Perimeter Technology VU-ACD /100, Maintenance Manual

Share
Download
Perimeter Technology VU-ACD /100 Maintenance Manual Download Page 119

3-11

VU-ACD™/100 Maintenance Guide – Host/DOS

Preventive, Corrective & File Maintenance

3.3.3

Temp Files – VU-ACD/100 For Windows Remote Terminal

Client-based report generation on VU-ACD/100 For Windows terminals creates temporary files
containing exported data and intermediate reports.  Intermediate files are deleted when a report prints
successfully.  Otherwise, they remain in the Windows temp directory.  To generate reports, the
VU-ACD/100 downloads report database tables to the client.  Files may or may not be overwritten
depending on the type of report and refresh rules established to control data requirements.

The user must periodically review and purge unnecessary temp files to prevent excessive disk usage
which may inhibit report generation.  Refer to the VU-ACD/100 For Windows Standard Reports Guide
for information on using the Local Data Management feature for purging temporary data files.

Summary of Contents for VU-ACD /100

































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands