manualshive.com logo in svg

Perimeter Technology VU-ACD /100, Maintenance Manual

Share
Download
Perimeter Technology VU-ACD /100 Maintenance Manual Download Page 180

5-28

Configuration Changes

VU-ACD™/100 Maintenance Guide – Host/DOS

5.5.4

MultiLink – Add Nodes

An VU-ACD/100 host equipped with MultiLink may be configured to support up to twenty data streams.
Adding or removing a data link to a DMS-100, 5ESS or InterLink input usually requires upgrading the
VU-ACD/100 security device and modifying node configurations.

Step

Description

Reference

1

Preconfigure and install appropriate datacomm equipment at
the host.

Host Installation Guide

2

Verify that the host security device will accept an additional
node configuration.  If necessary, update security device via
floppy diskette.  The update increments the number of
supported data links.

Security Device Update

Procedure

(shipped with serialized

floppy disk)

3

Run Node Configuration utility and enter parameters for the
new node.

Maintenance Guide

Summary of Contents for VU-ACD /100

































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands