manualshive.com logo in svg

Perimeter Technology VU-ACD /100, Maintenance Manual

Share
Download
Perimeter Technology VU-ACD /100 Maintenance Manual Download Page 76

2-58

Maintenance Utilities

VU-ACD™/100 Maintenance Guide – Host/DOS

Change Default Tape Drive

  

(continued)

Step

Prompt

Action

?

Steps 5 and 6 only appear if the user opted to use the Compaq TurboDAT Autoloader as

the default drive for VU-ACD/100 Data Management operations.

5

Enter the Changer slot # to reserve for
VU-ACD/100 Data Management
operations:

Type the number corresponding to the
cartridge slot in the Compaq TurboDAT
Autoloader that will be reserved for
VU-ACD/100 Data Management operations
(store/retrieve from a single cartridge) and
press 

Enter

.

NOTE:  Slots for automatic nightly backup are

separately assigned under SCO ARCserve/Open.

6

The Tape Drive Configuration Program will be executed now.

If this is a new Auto Changer installation, then the
Auto Changer tape drive component must be configured
using the 'Install a SCSI Tape Drive' option.

The drive being used for VU-ACD/100 Data Management
operations must be configured as the default Tape Drive using the
'Change default Tape Drive' option.

To configure a new tape drive:
- Select 'Configure SCSI Tape Drive'
- Select 'Install a SCSI Tape Drive'
- Follow documented instructions for adding a tape drive

To change the default drive:
- Select 'Configure SCSI Tape Drive'
- Select 'Change default Tape Drive'
- Set the desired tape device as default

Press <ENTER> to continue

Press 

Enter

.

7

Tape Drive Configuration Program

1. Configure SCSI Drive or Enhanced IDE tape drive
2. Configure a different type of tape drive

Select an option or enter q to quit:

Type 

1

 and press 

Enter

.

8

SCSI or Enhanced IDE Tape Drive Configuration Program

1. Install a SCSI Tape Drive
2. Install an Enhanced IDE Tape Drive
3. Remove a SCSI Tape Drive
4. Remove an Enhanced IDE Tape Drive
5. Change default Tape Drive
6. View Current SCSI and Enhanced IDE Tape Drive configuration

Select an option or enter q to return to
main menu

Type 

5

 and press 

Enter

.

Summary of Contents for VU-ACD /100

































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands