manualshive.com logo in svg

Perimeter Technology VU-ACD /100, Maintenance Manual

Share
Download
Perimeter Technology VU-ACD /100 Maintenance Manual Download Page 42

2-24

Maintenance Utilities

VU-ACD™/100 Maintenance Guide – Host/DOS

Step

Prompt

Action

11B

To disable fedlog event recording:

EVENT LOG - ENABLE/DISABLE

This feature allows all ACD events sent by the
Switch to be recorded in a log file.  The log file
can be used for troubleshooting if required.

Select the node number [1 -  n] or ‘q’ to
quit: 1

Event logging is currently ENABLED

Do you wish to disable event logging
(y/n)?

Event logging disabled for <Node ID>.

WARNING:
A Switch Initialization Request MUST
be executed for the change to take
affect.

Press <Enter> to continue

(Event Log Menu)

This prompt only appears if the system is
equipped with the MultiLink option.  Type
the desired node number and press 

Enter

.

Type 

y

 and press 

Enter

.

Refer to Section 2.8 and schedule a Switch
Initialization to enable fedlog data capturing.
– or –

Reboot the system (refer to Section 2.1.2.2).

Press 

Enter

.

Summary of Contents for VU-ACD /100

































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands