2-5
VU-ACD™/100 Maintenance Guide – Host/DOS
Maintenance Utilities
Step
Prompt
Action
5
ACD MIS shutdown in progress
...please wait
stage one: looking for ‘start’ process
- [start] process terminated
stage two: looking for other relevant
processes
ACD MIS process shutdown completed
Press <ENTER> to continue.
The following message is broadcast to all
terminals:
“ACD MIS is being shut down for
maintenance
Press ESC key to continue”
Press
Enter
to return to the Maintenance Menu.
To restart the system, select Option 2 – Shut
Down ACD MIS & UNIX System from the
Maintenance Menu (refer to Section 2.1.2.2).
2.1.2.2
Shut Down ACD MIS & UNIX System
This function should only be performed before choosing to power down or before rebooting the
VU-ACD/100. Data collection ceases after shutdown. No further operations can be performed without
restarting the system.
Refer to the system startup procedure in Section 2.1.3.
Step
Prompt
Action
1
MAINTENANCE MENU
1) Shut Down ACD MIS
2) Shut Down ACD MIS & UNIX System
3) Tape Backup/Restore Utilities
4) System Logs
5) Load Management Limits
6) Change Maintenance Logon Password
7) System Hardware Configuration
8) Install a Software Update
9) Request Switch Initialization
10) 5ESS Provisioning
11) List Logged-In Users
Select an option, or enter q to quit:
Type
2
and press
Enter
to select Shut Down
ACD MIS & UNIX System.
Shutdown ACD MIS and UNIX
This selection will shut down the ACD MIS processes and UNIX
operating system. This selection is used reboot the computer
or prepare it to be turned off.
******CAUTION******
Shutting down the ACD MIS processes will stop all data collection.
2
Do you want to continue? (y/n)
Type
y
and press
Enter
to continue (or
n
and
press
Enter
to stop).
