manualshive.com logo in svg

Perimeter Technology VU-ACD /100, Maintenance Manual

Share
Download
Perimeter Technology VU-ACD /100 Maintenance Manual Download Page 174

5-22

Configuration Changes VU-ACD™/100 Maintenance Guide – Host/DOS

5.5.2.4 Remote Terminal Printer

 (Local Printer)

Step Description Reference

1 

Preconfigure the printer and connect it via an IBM parallel
printer cable to the parallel port of the remote terminal.

Host Installation Guide

2 

Use the Device Configuration screen to assign a Remote
Terminal Printer to the same address as the Remote
Terminal.

NOTE:  The Remote Terminal must already be configured to the

system.

System Administration Gd.

3 

Establish user device permissions for the new printer. VU-ACD User's Guide

VU-ACD/Windows

Configuration Guide

4 

If reports are being routed to a printer via Windows 98/Me/NT,
verify that the correct printer driver has been installed and
selected via Windows 98/Me/NT/2000/XP.

 Windows 98/Me/NT

User’s Guide

5 

Log into the VU-ACD/100 host, create and send a report to
the printer.

VU-ACD User's Guide

VU-ACD/Windows

Standard Reports Guide

5.5.2.5 External Display

Step Description Reference

1 

Assign the serial port on the DigiBoard to which the external
display will be connected.

Host Installation Guide

2 

Complete and test a datacomm cable connection between the
DigiBoard and the external display and/or remote terminal.
External displays can be wired in star or daisychain confi-
gurations to the host.  An external display can also be asso-
ciated with a remote terminal.

Host Installation Guide

Application Note

3 

Preconfigure the external display and complete the data-
comm connection to the unit before mounting the display.

Application Note

4 

Use the Device Configuration screen to define the new
external display.  Multiple displays can be assigned to the
same serial port.  An external display can also be assigned to
the serial port for a remote terminal.

System Administration Gd.

5 

Establish user device permissions for the new external
display.

VU-ACD User's Guide

VU-ACD/Windows

Configuration Guide

6 

Log into the VU-ACD/100 host, create and send messages
to the external display.

VU-ACD User's Guide

VU-ACD/Windows

Configuration Guide

Summary of Contents for VU-ACD /100

































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands