Panasonic PV-500, User Manual

Page: 269 / 494

267
Se
tt
ing I
n
s
p
e
c
tio
n C
on
d
it
ions
C
h
ap
te
r 4
INDE
X
4.14 Checker List
This function shows setting status and execution result of the checkers, position adjustments, area size
adjustments, numerical calculations, judgements and character/figure drawing. To change the settings of them,
you can jump to the setting window from this window.
In this function, all displayed items in the table are called “checker” including position adjustment, judgement
and character/figure drawing as well as the general checkers.
Displaying Checker List
1.
Select "INSPECTION" from the menu bar.
2.
Tilt the ENTER key right and select
displayed “Checker List”.
The checker list is displayed.
3.
Press the TRIG key.
A test is executed and its result appears on the
screen.
When a live image is displayed on the screen,
PV captures a new image first and runs a test.
When a memory image is displayed, it runs a
test using the current memory image without
capturing any images.
Checker Pattern displayed on Screen Window
High transparency setting of the SETUP menu allows
an image or checker patterns on the screen window,
which is overlapping with the window of Checker List,
to be seen.
When its camera setting is the same as that of the
image currently displayed on the screen window, the
checker pattern selected in the checker list is displayed
in orange.
The condition to display the checker patterns for
checkers other than the selected checker is determined
by the setting of "Pattern Display" in the Image Menu.
Refer to page 94 for the details of setting procedure.