Panasonic PV-500, User Manual

Page: 383 / 494

381
O
pe
ra
tio
n a
n
d D
a
ta
O
ut
put
t
hr
ou
gh I
/O
T
e
rm
ina
ls
C
h
ap
te
r 8
INDE
X
7. After the second image capturing is completed, PV executes checkers. If the first data has been
output at the time, REN0 signal is turned on. If it has not, PV waits until the data is output and turns
on REN0 signal.
After REN0 signal turns on, PV500 can receive STA0 signal (or capture and image).
At the timing when it starts capturing the next image, input STA0 signal.
Setting “Image Output” to “Async.(inspection first)” turns on REN0 signal and allows capturing the third
image after the second image capturing or the first synchronous result output (general output through I/O
and synchronously) whichever completed later, before outputting the general result and the image of the
first inspection is completed.