Panasonic PV-500, User Manual, Page: 223 / 494

221
Se
tt
ing I
n
s
p
e
c
tio
n C
on
d
it
ions
C
h
ap
te
r 4
INDE
X
Setting Judgement Condition
Measurement conditions vary depending on the type of geometry calculation.
Detect mode Judgement limits Input range
Distance Point-Point Median X, Median Y -99999999.999 to 99999999.999
Distance 0 to 99999999.999
Line Angle 0 to 359.999(When Angle Range is 0<->360)
-179.999 to 180.000 (When Angle Range is -180<->180)
Intersecting Point IP X, IP Y -99999999.999 to 99999999.999
Angle 0 to 359.999
Median of Two Lines Angle 0 to 359.999
Line Angle 0 to 359.999 (When Angle Range is 0<->360)
-179.999 to 180.000 (When Angle Range is -180<->180)
Distance Point-Line Pedal X, Pedal Y -99999999.999 to 99999999.999
Distance 0 to 99999999.999
Pedal Angle 0 to 359.999 (When Angle Range is 0<->360)
-179.999 to 180.000 (When Angle Range is -180<->180)
Approximate Line Line Angle 0 to 359.999 (When Angle Range is 0<->360)
-179.999 to 180.000 (When Angle Range is -180<->180)
Standard Deviation 0 to 99999999.999
Approximate Circle Center X, Center Y -99999999.999 to 99999999.999
Radius 0 to 99999999.999
Standard Deviation 0 to 99999999.999
Approximate Ellipse Center X, Center Y -99999999.999 to 99999999.999
Major Axis 0 to 99999999.999
Minor Axis 0 to 99999999.999
Major Axis Gradient 0 to 359.999 (When Angle Range is 0<->360)
-179.999 to 180.000 (When Angle Range is -180<->180)
Standard Deviation 0 to 99999999.999
Maximum and Minimum Values of Line Angle
As for Line Angle, the maximum value can be set to a smaller value than the minimum value (Max. value < Min.
value). Set the values checking the guide display.
In the example on the right, it will be judged
as OK if the detected angle is in the range of
"290 to 70 degrees".
In the example on the right, it will be judged
as OK if the detected angle is in the range of
"110 to -110 degrees".