manualshive.com logo in svg

Panasonic PV-500, User Manual, Page: 352 / 494

Share
Download
Panasonic PV-500 User Manual Download Page 352

 

350 

C

h

ap
te

r 7

 

C

ha
ng
ing
 C
o

n

figu
ra

tion
 

7.3  Information Display and Ejection of SD Memory Card 

“SD Property” shows information of a SD memory card when attaching it in the slot. 

“Eject SD Card” prepares to eject a SD memory card. 

7.3.1  Displaying Information of SD Memory Card 

You can confirm the information of a SD memory card attached to the SD memory card slot of PV500. 

The information includes capacity and free space of the SD memory card, the saving date of the files, and their 
size. 

1.

  Select "TOOL” > “SD Property” from the menu 

bar. 

The information is displayed. 

2.

  Select the file list. 

The files saved in the place are listed. 

 

 

To go up to the upper hierarchy, select “..”. 
A file can be added while the information is 
displayed. Selecting “Update” shows the latest 
status. 

 

7.3.2  Preparing to Eject SD Memory Card (Eject SD Card) 

If you forcibly eject a SD memory card while the device is accessing its memory, the SD memory card and 
PV500 might be damaged. Be sure to prepare to eject the card by following the procedure described below 
before withdrawing it from the slot. 

1.

  Select "TOOL” > “Eject SD Card” from the menu bar. 

The confirmation message appears. 

2

.  Select "Yes". 

When it is ready for ejection, the message saying “The SD card can be ejected safely.” appears. Select 
“OK". 

 

Now, the preparation to eject the card is complete. 
Push the SD memory card into the inserting direction and remove the ejected card from the slot. 

Summary of Contents for PV-500















































































































































































































































































































































































































































































































Reviews:

No comments