Panasonic PV-500 Page 243 User Manual Download

Page: 243 / 494

241

Se
tt

ing I

tio

n C

on
d

ions

ap
te

r 4

INDE

Data That Can Be Used in Judgement

The data described below is that can be used in judgement expression. The symbols in parentheses are
displayed in operation expressions.

Checker - Position Adjustment (PAC) No.0-999

Item

Condition for OK
judgement

Judgement
(JUDGE)

The specified
object or edge is
detected.

Base Judgement
(BJUDGE)

Position Adjustment:

• Binary Edge

• Gray Edge

Position Adjustment:

• Feature

Extraction

• Matching

• Smart Edge

(Circle)

Position Rotation
Adjustment:

• Feature

Extraction
(Principal Axis
Angle)

• 360-degree

Matching

Position Rotation
Adjustment

• Feature

Extraction
(2 checkers)

• Matching

(2 checkers)

Rotation Adjustment
all

No.0 (0)

Horizontal Base
Checker 0

Base Checker 0

The base checkers
can detect the
specified object or
edge.

No.1 (1)

Horizontal Base
Checker 1
(Center Detection)

Base Checker 1
(Center Detection)

No.2 (2)

Vertical Base Checker 2

Base Checker 2

No.3 (3)

Vertical Base Checker 3
(Center Detection)

Base Checker 3
(Center Detection)

Others

Item

Condition for OK judgement

Checker - Area Size
Adjustment (AUC) No.0-999

Judgement (JUDGE)

The specified object or edge is detected.

Checker - Line (LIC)
No.0-999

Judgement (JUDGE)

Pixel judgement and Object judgement are both
OK.

Pixel judgement (DJUDGE)

The number of pixels is within the Judgement
limits.

Object judgement (LJUDGE)

The number of objects is within the Judgement
limits.

Checker - Binary
Window(BWC) No.0-999

Judgement (JUDGE)

Area value is within the OK Judgement limits.

Checker- Gray
Window(GWC) No.0-999

Judgement (JUDGE)

Gray Average is within the OK Judgement limits.

Checker - Binary
Edge(BEC) No.0-999

Judgement (JUDGE)

The number of detected edges is within the OK
Judgement limits.

Checker - Gray Edge(GEC)
No.0-999

Judgement (JUDGE)

Checker- Feature Extraction
(FEC) No.0-999

Judgement (JUDGE)

The number of detected objects is within the OK
Judgement limits.

Checker - Smart
Matching(SMC) No.0-999

Judgement (JUDGE)

The number of detected objects at the last phase
is equal to the maximum limitation of the number
of detected objects that was set at the last phase
of the sequence.

Checker - Flaw
Detection(FWC) No.0-999

Judgement (JUDGE)

The number of detected flaws is within the OK
Judgement limits.

Summary of Contents for PV-500















































































































































































































































































































































































































































































































Search results

Summary of Contents for PV-500

Reviews:

Related manuals for PV-500

Brands by name

Popular brands

Panasonic PV-500, User Manual

Search results

Summary of Contents for PV-500

Reviews:

Related manuals for PV-500

Brands by name

Popular brands