Panasonic PV-500, User Manual, Page: 2 / 494

Before Reading This Manual
Thank you for purchasing the IMAGECHECKER PV500.
This manual describes information on the hardware such as how to install and wire and the software such as how
to set the functions. Read this User’s Manual carefully before use.
Safety Precautions
To ensure that you use this product correctly, read this User’s Manual thoroughly before use. Make sure that you
fully understand the product and information on safe.
WARNING
Critical situations that could lead to user’s death or serious injury are assumed by mishandling of the product:
•
Do not use this product in areas with inflammable gas. It could lead to an explosion.
•
Exposing this product to excessive heat or open flames could lead to damage to the lithium battery or other
electronic parts.
•
Do not store a lens in the locations subject to direct sunlight. It could lead to smoke generation.
•
Do not look at the sun through a lens. It could lead to blindness.
•
Always take precautions to ensure the overall safety of your system, so that the whole system remains safe
in the event of failure of this product or other external factor.
CAUTION
Critical situations that could lead to user’s injury or only property damage are assumed by mishandling of the
product:
•
Do not dismantle or remodel the product. It could lead to excessive exothermic heat or smoke generation.
•
Do not touch the terminal while turning on electricity. It could lead to an electric shock.
•
Do not allow foreign matters such as liquid, flammable materials, metals to go into the inside of the product.
It could lead to excessive exothermic heat or smoke generation.
•
Do not bend the cables forcibly, place a heavy object on them or bring them close to a thermal appliance. It
could lead to an electric shock or smoke generation.
•
To prevent excessive exothermic heat or smoke generation, use this product at the values less than the
maximum of the characteristics and performance that are assured in these specifications.
•
Use the external devices to function the emergency stop and interlock circuit.
•
Connect the wires or connectors securely. The loose connection could lead to excessive exothermic heat
or smoke generation.
•
Do not undertake construction (such as connection and disconnection) while the power supply is on. It
could lead to an electric shock.