Panasonic PV-500 Page 245 User Manual Download

Page: 245 / 494

243

Se
tt

ing I

tio

n C

on
d

ions

ap
te

r 4

INDE

Item

Condition for OK judgement

Checker - Connector Gray
Window (CGW) No.0-999

Judgement (JUDGE)

Individual
Judgement(PJUDGE) No.0-99

Checker - Connector Gray
Edge (CGE) No.0-999

Judgement (JUDGE)

Pitch Total Judgement and Distance Difference
Total Judgement are both OK.

Pitch total judgement
(PTJUDG)

Pitch Judgements are all OK.

Distance Difference Total
Judgement (UTJUDG)

Distance Difference Judgements are all OK.

Pitch Judgement(PJUDGE)
No.0-99
(Judgement of each pitch)

The detected pitches are within the Judgement
limits of pitches.

Distance Difference
Judgement(UJUDGE) No.0-99
(Judgement of each distance
difference)

The detected distance difference is within the
Judgement limits of distance difference.

Smart Edge (Circle) (SEC)
No.0-999

Judgement (JUDGE)

The judgements of Measurement Value, Standard
Deviation, Circularity and Unused Edge Count are
all OK.

Measurement Judgement
(LJUDGE)

Measurement Value*1) is within the range of the
maximum/minimum limitations.

Standard Devation Judgement
(SJUDGE)

Standard Deviation is within the range of the
maximum/minimum limitations.

Circularity Judgement
(CJUDGE)

Circularity is within the range of the
maximum/minimum limitations.

Unused Edge Count
Judgement (FJUDGE)

Unused Edge Count is within the range of the
maximum/minimum limitations.

Individual Judgement
(IJUDGE) No.0-3599

The result of the cell with the specified No. is OK.
(Undetected, excluded and NG cells are NG.)

Smart Edge (Line) (SEL)
No.0-999

Judgement (JUDGE)

The judgements of Measurement Value, Standard
Deviation, Linearity and Unused Edge Count are
all OK.

Measurement Judgement
(LJUDGE)

Measurement Value*2) is within the range of the
maximum/minimum limitations.

Standard Devation Judgement
(SJUDGE)

Standard Deviation is within the range of the
maximum/minimum limitations.

Linearity Judgement (JUDGE) Linearity is within the range of the

maximum/minimum limitations.

Unused Edge Count
Judgement (FJUDGE)

Unused Edge Count is within the range of the
maximum/minimum limitations.

Individual Judgement
(IJUDGE) No.0-3599

The result of the cell with the specified No. is OK.
(Undetected, excluded and NG cells are NG.)

Geometry Calculation
(GGC) No.0-999

Judgement (JUDGE)

All the judgements for the items set in Judgement
Limits are OK.

X Judgement (XJUDGE)

IP X or Center X is within the range of the
maximum/minimum limitations.

Y Judgement (YJUDGE)

IP Y or Center Y is within the range of the
maximum/minimum limitations.

Standard Deviation
Judgement (SJUDGE)

Standard Deviation is within the range of the
maximum/minimum limitations.

Angle Judgement (AJUDGE)

Line Angle is within the range of the
maximum/minimum limitations.

Distance Judgement
(DJUDGE)

Distance is within the range of the
maximum/minimum limitations.

*1) Measurement Value = Radius, Diameter or Width (decided according to the setting value of Detect Mode)
*2) Measurement Value = Deviation, Distance or Width (decided according to the setting value of Detect Mode)

Summary of Contents for PV-500















































































































































































































































































































































































































































































































Search results

Summary of Contents for PV-500

Reviews:

Related manuals for PV-500

Brands by name

Popular brands

Panasonic PV-500, User Manual

Search results

Summary of Contents for PV-500

Reviews:

Related manuals for PV-500

Brands by name

Popular brands